No bootable divice insert boot disk and press any key

[Tirumalesh-123]

Bbootable divice problem

[Max3Aj]

@Tirumalesh-123, Welcome to HP Support Community. 

Thank you for posting your query, I will be glad to help you. 
The error message “No bootable device – insert boot disk and press any key” typically means your PC is unable to detect a valid operating system to boot from. This can be caused by incorrect BIOS settings, a disconnected or failed hard drive, or corrupted boot files.

Let’s walk through some steps to resolve this:

Power Reset the PC

1. Turn off the computer completely.
2. Unplug the power cable and remove the battery (if applicable).
3. Press and hold the Power button for 15 seconds.
4. Reconnect the power and try turning it on again.

Check BIOS Boot Order

1. Turn on the PC and immediately press the F10 key repeatedly to enter BIOS Setup.
2. Go to the Boot tab.
3. Ensure your primary hard drive (usually labeled as HDD or SSD) is listed first in the boot order.
4. If not, use the arrow keys to move it to the top.
5. Press F10 to save and exit.

Run HP Hardware Diagnostics

1. Turn off the PC.
2. Turn it back on and immediately press F2 repeatedly to open HP PC Hardware Diagnostics.
3. Select Component Tests > Hard Drive > Quick Test.
4. If the test fails, your hard drive may need replacement.

Use HP Recovery or Windows Installation Media

If the hard drive passes diagnostics but the issue persists:

1. Create a bootable USB using the Windows Media Creation Tool.
2. Boot from the USB (press F9 at startup to select boot device).
3. Choose Repair your computer > Troubleshoot > Startup Repair. 

I hope this helps. 

Take care and have a good day. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Select "Yes" on the bottom left to say “Thanks” for helping! 

Max3Aj

HP Support