-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Desktops
- Desktop Boot and Lockup
- OMEN 30L Desktop GT13-0857nz Bundle PC (2S9Q4EA) Reboot rand...
Create an account on the HP Community to personalize your profile and ask a question
02-12-2024 02:49 PM - edited 02-12-2024 02:51 PM
Hi, my PC is rebooting pretty randomly with no blue screen nor error message.
By searching a little bit, i found that i have a critical error from the kernel power (Category 63)
From times to times I also have blue screen. The last one was : WHEA_UNCORRECTABLE_ERROR.
Then the black screen with Boot device not found. Hard disk - 3F0.
Do you have any idea on what it is ?
02-15-2024 09:59 AM
Hi @DepBastos,
Welcome to the HP Support Community.
Thank you for posting your query, I will be glad to assist you.
I see that you are facing an issue with your PC that reboots randomly.
Please follow the steps below to perform an extensive system test to confirm if the hardware is working fine.
1) Shut down the computer.
2) Turn the computer back on again and repeatedly tap on the ESC until a Startup menu appears.
3) Press F2 once.
4) Go to the system test > extensive test
If the hardware is working fine. Kindly refer to the steps on this link to update the BIOS and let me know if that resolves the issue.
Make sure you keep only the charger plugged in while updating the BIOS for your PC.
Click on the + sign next to BIOS and then download the file.
Open the file and follow the on-screen instructions to complete the update.
Please install all the pending updates for the Windows operating system following the below steps.
go to Start > Settings > Update & Security > Windows Update and select Check for updates. If the upgrade is available for your device and you want to proceed, download and install it.
Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!
I hope this helps.
Take care and have a great day ahead!
Irwin6
HP Support
Irwin6
I am an HP Employee
If you found this post helpful, you can let others know by clicking the “Accept as Solution” button. You can also show your appreciation, with a kudos, by clicking the “Thumbs up" button!