cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
New member
1 0 0 0
Message 1 of 2
148
Flag Post
HP Recommended

OMEN pc beeping after BIOS update

Z5M58AA
Microsoft Windows 10 (64-bit)

Late in the night my HP support assistant suggested a bios update to my HP omen 270-224 that I have had for about 2.5 years. I checkmarked the update then it stated it required a restart. I got up from my pc and knocked the power cable loose on my way out of the room accidentally. After plugging the power cable back in and turning on, nothing will display on the monitor. And it gives a beep code that initially starts with 8 long beeps, then switches to 2 long 2 short repeating 5 times, then stopping, although the long are a different pitch than the initial 8 beeps. I looked this up and appearently this is a bios error, I let it run for a couple minutes and nothing came on the screen, since then any time I restart it gives this beep code.

I have already tried

-hitting escape on startup

-hitting f2 on startup

-hitting f10 on startup

-holding win+b on startup

-holding win+v on startup

-resetting the cmos using the jumpers

-putting a bios recovery usb for the 870-224 in the usb slot then hitting win+b, same for win+v

None of these results has had anything display on the monitor at all. And the beep code stays the same, resetting the cmos made it power on then power off then power on again before beep code happened once more, but no difference other than that, still nothing on display. Would like to know what I can do to fix this at this time.

 

1 REPLY 1
Highlighted
HP Support Agent
HP Support Agent
5,609 5,610 215 359
Message 2 of 2
68
Flag Post
HP Recommended

OMEN pc beeping after BIOS update

@Latenix Welcome to HP Community!

 

I understand that OMEN pc beeping after BIOS update.

 

As you have stated that you have already performed the troubleshooting steps. The issue is not resolved.

 

I would suggest you contact our phone support and check for the support option. They will help you.

 

Or you can contact the local service center for repair.

 

Here is how you can get in touch with phone support.

 

 

1)Click on this link - www.hp.com/contacthp/

 

2)Select the product type.

 

3)Enter the serial number of your device or select let HP detect your product option.

 

4)Select the country from the drop-down.

 

5)You should see the HP phone support number or Chat option listed.

 

We are experiencing longer than expected wait times to reach an agent due to the CoViD-19 impact and there might have been issues in you getting the expected resolution on the issue. 

 

Keep us posted,

If you would like to thank us for our efforts to help you, 


Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 


Have a great day!

 

Reply
0 Kudos
Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation