cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
Level 1
2 1 1 0
Message 1 of 3
354
Flag Post

Solved!

PC Wont start up, fans are running and after a while a clicking sound occurs

HP Recommended
HP Pavilion Gaming Desktop 690-0805no
Microsoft Windows 10 (64-bit)

Was working on the computer it was working fine and took a breef brake. When i came back the pc was off, then started it up again. All the fans are running correctly but after a while a clicking sound occurs in timing to the power buttons flashing and the screen gets no signal. pulled out and switched every cable and switched monitor and did a hard reset. pulled out memory, graphic card, and hdd and reinsertet with no results... what to do!

2 REPLIES 2
Highlighted
New member
6 6 0 0
Message 2 of 3
Flag Post
HP Recommended

Same happened to me after windows updates (HP Firmeware update).

 

8 beeps + 2 long + 2 shot -> 4 times.

 

I contacted several times support team, they dont believe that it was windows updates and said i was a hardware problem, so i needed to ship my pc to repair.

 

Now i have proff that i was not the only one with this issue.

 

Thanks.

 

Oh and btw ship it to fix they need to restore bios for sure, this last update really damaged the pc.

 

2 Major issues in 3 months with updates. I would not advice HP to anyone now.

Reply
0 Kudos
Highlighted
Author
Level 1
2 1 1 0
Message 3 of 3
Flag Post
HP Recommended

IMG_20200707_130951_374.jpg

So I took it all apart and checked and cleaned all the hardware. Measured and looked for anything wrong. But nothing.

Several attempts booting in BIOS with USB.

Still nothing.  

Then I come across something about the new BIOS update and people struggling with the new update installation. 

So why not test an earlier version of BIOS? 

I downloaded a old version onto my USB and what do you know. IT came back to life! 

You have to push down windows + B and then push hold start button 3 sec continuing holding down win + B until screen comes up. My PC didn't make any beeps like they say it would. 

Then I installed the old BIOS started the computer. Installed all the new hardware drivers then newest BIOS then Windows update. 

Now I have a working  computer 😊

 

Reply
0 Kudos
Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation