• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
HP Recommended
Prodesk 600 g6 small form factor

Recover after boot failure is enable but no hard drive option is enabled in the uefi boot order be sure that u e f i boot drive is properly installed and enabled in the uefi boot order.

 

It is a HP 600 G6 prodesk small form factor

 

Previously there was pxe over ipv4 error

When disable pxe boot from bios I get the recover after boot failure is enable but no hd found etc

 

Storage  test comes pass

 

Kindly drop the steps to get rid of this as iam not able to boot into OS.

 

1 REPLY 1
HP Recommended

That previous error means that the UEFI settings had been changed to default to booting from a network device instead of an internal drive.

 

If your UEFI settings show no bootable drive, that probably means the drive has failed.

 

See the following HP Guide for more information:


https://support.hp.com/au-en/document/ish_3053911-2842957-16



I am a volunteer and I do not work for, nor represent, HP
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.