Reboot failure

[Mai26]

I received a notification on my computer that said that there's an error and you need to restart your computer.I pressed the restart option so I waited for a while for computer to restart but it didn't instead my computer screen is white and it's written that : Recover after Boot failure is enabled but no hard drive boot options is enabled in the URFI boot order. Be sure that a UEFI drive is properly installed and enable in the UEFI boot order

[Garp_senchau]

@Mai26, Welcome to HP Support Community,

Thank you for posting your query.

It sounds like your computer is having trouble booting up, and the error message suggests that the system is unable to find a bootable drive due. Don't worry—I can help guide you through fixing this!

To resolve this, first, turn off your computer completely, then turn it back on and immediately press the Esc key to access the BIOS settings. Once in the BIOS, navigate to the Boot Order or Boot Options section and ensure that your hard drive or SSD (the drive where Windows is installed) is set as the first boot option. If it's not listed, make sure it’s enabled or properly connected. 

You may also need to enable UEFI boot mode or Secure Boot depending on your system configuration. After making the changes, save them and exit the BIOS. 

Reference guides: 

HP PCs - Computer does not turn on, start, or boot | HP® Support

HP PCs - Resolving diagnostic errors that are displayed during startup | HP® Support

I hope these steps help resolve the issue

Please feel free to reply here if you have any questions or if you need further clarification on any of the steps. 

Take care and have a good day. 

If my response helped, please mark it as an Accepted Solution! ✅ It helps others and spreads support. 💙 Also, tapping "Yes" on "Was this reply helpful?" makes a big difference! Thanks! 😊

Regards,