• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines

Featured blog article:

HP Recommended
HP Pavilion 31.5 inch All-in-One Desktop PC 32-b0000i (3N9R4AV)

Hello,

When I enable Secure Boot on my HP Pavilion All-in-One 32-b0001ns, the PC fails to boot. With Secure Boot disabled, Windows works normally. I need Secure Boot enabled because the anti-cheat of a game I play (Riot Vanguard) requires it on Windows 11.

SYSTEM DETAILS
- Model: HP Pavilion AiO 32-b0001ns (product number 6Z7T4EA)
- Motherboard: HP 892C (board version 94.33)
- BIOS: F.20 Rev.A (12/18/2025), installed from the HP support website
- Windows 11 version 26H2, original HP installation, no other operating systems
- BIOS mode: UEFI. "Platform Key" shows as "enrolled"

SYMPTOM
With Secure Boot enabled, at startup I get:
1. "Secure Boot Violation. Invalid signature detected. Check Secure Boot Policy in Setup."
2. Then: "No boot device found. Hard Disk (3F0)."

DIAGNOSIS
- The BIOS Secure Boot db contains "Microsoft Windows Production PCA 2011" and "Microsoft Corporation UEFI CA 2011". It does not contain "Windows UEFI CA 2023", and the KEK does not contain "KEK 2K CA 2023".
- The Windows boot manager (bootmgfw.efi on the EFI partition) is signed by "Microsoft Windows Production PCA 2026". The copies in C:\Windows\Boot and in WinSxS (builds 9444, 9711 and 9818) are signed the same way. No copy signed with the 2011 certificate remains on the system.
- Everything suggests the BIOS does not recognize the signature of the current Windows boot manager.

WHAT I HAVE TRIED
- Updating the BIOS to F.20 (the latest offered on the support site). No change.
- Rebuilding the boot files with bcdboot. No change.
- Forcing the Windows certificate update (AvailableUpdates = 0x5944, then running the \Microsoft\Windows\PI\Secure-Boot-Update scheduled task, with reboots in between). The task finishes with result 0, but the state stays at:
UEFICA2023Status = InProgress
WindowsUEFICA2023Capable = 0
UEFICA2023Error = 0 (no errors)
No events 1795, 1796 or 1808 appear. The BIOS still lacks the 2023 certificate.
- In Boot Options, "Load HP Factory Default Keys" is always greyed out. I have not used "Clear All Secure Boot Keys" to avoid losing the current keys.

QUESTIONS
1. Is there, or is there planned, a BIOS for board 892C that includes the 2023 certificates (Windows UEFI CA 2023 and KEK 2023)?
2. In the meantime, is there an HP-supported procedure to add them or restore the factory keys on this model? Why is "Load HP Factory Default Keys" greyed out?
3. Is this a known issue on the Pavilion AiO 32-b0xxx series?

I can provide screenshots of the BIOS, the Windows registry and the PowerShell output if needed.

Thank you.1_registro_Servicing.png2_certificados_BIOS_y_firma_cargador.png3_infraccion_arranque_seguro.jpg4_BIOS_opciones_de_arranque.jpg5_opcional_WinSxS.png

7 REPLIES 7
HP Recommended

Hi @danrees22, and thanks for the very detailed report. I am sorry you are having difficulty getting Secure Boot to work on your Pavilion All-in-One 32-b0001ns. Your evidence is clear: with Secure Boot on, your PC reports “Secure Boot Violation” and a 3F0 error, while it starts normally with Secure Boot off. The BIOS factory keys only contain the 2011 certificates, not Windows UEFI CA 2023 (UEFICA2023) or Security Database, and your boot loader is signed by Microsoft Windows Production PCA 2026. Microsoft requires booting a Secure Boot-enabled Windows 11 device signed with Windows UEFI CA 2023, but your BIOS says UEFICA2023AvailableUpdates=0x5944, UEFICA2023Capable=0 and UEFICA2023Status=InProgress.

The safest option while this is unresolved is to keep Secure Boot disabled, keep BIOS F.20 Rev.A, and use Windows Update as normal. From your report you have already, with good reason, avoided Clear All Secure Boot Keys and restoring HP Factory Default Keys, and you should continue — do not clear the keys, and do not try to import UEFICA2023 keys yourself. HP has addressed certificate updates on some models through a BIOS update, and there is no safe manual workaround on a system where “Load HP Factory Default Keys” is greyed out.

Please check HP Software & Drivers for your exact product number 6Z7T4EA for a newer BIOS than F.20 Rev.A, and keep Windows fully up to date: https://support.microsoft.com/en-us/topic/3c5ae7fc-9fb6-9af1-1984-b5e0412c556a — I did not find a verified model-specific driver page for the 32-b0001ns in this check, so use HP's driver search by product number rather than a third-party BIOS file.

I cannot confirm from the Community whether a BIOS update with the 2023 certificates is planned for the 32-b0001ns / board 892C. If you open a case with HP Support, please let us know the exact case number and what they say. Please reply with your Windows build number and whether any other BIOS version has been offered for 6Z7T4EA.


I am proudly Mexican, a Computer Systems Engineer and an HP Community volunteer (not an HP employee).
Did this reply help? Click the "Yes" button below to say thanks.
Did it solve your problem? Please click "Accept as Solution" so others with the same issue can find it.
Please keep the conversation in the thread and never post personal data (serial number, email, phone or address).


HP Recommended

Hi @GOLD_MASTER, thank you for the quick and detailed reply.

- Windows build: 26H2, build 26300.9818
- HP Software & Drivers for 6Z7T4EA lists only one BIOS: F.20 Rev.A (12/18/2025, ROM family SSID 892C). No other BIOS version has been offered.
- I will keep Secure Boot disabled, will not clear or import any keys, and will keep Windows fully updated.
- I am opening a case with HP Support and will post the case number and their answer here.

Thanks again.

HP Recommended

Hi @danrees22,

That's the right plan. Keeping Secure Boot off and the keys untouched is the safe choice until HP releases a BIOS with the 2023 certificates. Thanks for posting the case result when you have it, since it will help others with the same board. I'll keep an eye on the thread.


I am proudly Mexican, a Computer Systems Engineer and an HP Community volunteer (not an HP employee).
Did this reply help? Click the "Yes" button below to say thanks.
Did it solve your problem? Please click "Accept as Solution" so others with the same issue can find it.
Please keep the conversation in the thread and never post personal data (serial number, email, phone or address).


HP Recommended

Hi @GOLD_MASTER, thank you again for the detailed reply and for the guidance.

Here are the details you asked for:

- Windows build: version 26H2, build 26300.9818. Windows Update reports the system is up to date, including optional updates.
- BIOS: HP Software & Drivers for 6Z7T4EA lists only one BIOS, F.20 Rev.A (12/18/2025), which is already installed. No other BIOS version has been offered.

I have opened a case with HP Support through their chat. Case number:

>Do not include the product serial number, any case numbers, or any private information like Email or Phone Number<.

.

Summary of what HP said so far:
- HP's virtual assistant stated that BIOS updates including the 2023 Secure Boot certificates (Windows UEFI CA 2023) are being rolled out for compatible models, including Pavilion, during 2026 and continuing until April 2027 for platforms in production, and that the update would be available through HP Software & Drivers or Windows Update when ready.
- The human agent has acknowledged the Secure Boot violation and said they will check it. They have not yet confirmed whether the 6Z7T4EA / board 892C is included in that plan or given a date.

In the meantime I am keeping Secure Boot disabled, I have not cleared or imported any keys, and I will keep Windows fully updated. I will update this thread with HP's answer as soon as I receive it.

Thanks again.

HP Recommended

Hi @danrees22, thank you for the update, and for sharing what HP Support told you.

 

Your plan is the right one:

 

1. Keep Secure Boot disabled for now.

 

2. Do not clear or import the Secure Boot keys.

 

3. Keep Windows updated, and check for a new BIOS on the HP support site when it becomes available: https://support.hp.com/us-en/drivers

 

Please update this thread when HP Support replies, especially whether your model 6Z7T4EA, board 892C, is included in the BIOS updates, and whether they give you a date.


I am proudly Mexican, a Computer Systems Engineer and an HP Community volunteer (not an HP employee).
Did this reply help? Click the "Yes" button below to say thanks.
Did it solve your problem? Please click "Accept as Solution" so others with the same issue can find it.
Please keep the conversation in the thread and never post personal data (serial number, email, phone or address).


HP Recommended

Hey @GOLD_MASTER, my issue was solved after a detailed talk with the HP Support assistant!
I had to delete my security keys and import the predeterminated ones from HP.
Thanks for all the help!

HP Recommended

Hi @danrees22, thank you for coming back with the good news — I am glad HP Support helped you solve it, and that your Pavilion All-in-One 32-b0001ns is booting again.

 

Your note is important for anyone else reading this: deleting the Secure Boot keys and importing HP's predetermined ones is a procedure HP Support guided you through step by step. Please do not try that on your own without HP Support guiding you, because clearing the keys without importing the right ones can stop the computer from booting at all.

 

Could you just confirm that Secure Boot is now turned on and the computer starts normally every time? Thanks again for sharing the solution.


I am proudly Mexican, a Computer Systems Engineer and an HP Community volunteer (not an HP employee).
Did this reply help? Click the "Yes" button below to say thanks.
Did it solve your problem? Please click "Accept as Solution" so others with the same issue can find it.
Please keep the conversation in the thread and never post personal data (serial number, email, phone or address).


† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.
-->