cancel
Showing results for 
Search instead for 
Did you mean: 
DaanG
New member
1 0 0 0
Message 1 of 2
131
Flag Post

Startup problem after bios update

HP Recommended
HP 22-3000nd
Microsoft Windows 10 (64-bit)

The HP support app gave me a recommendation to run a BIOS update. So I did. After the update was installed, my computer is stuck in the bios update and restart of the computer. It is repaiting a loop of bios recovery and then tries to start up,  then goes back to bios update, then bios recovery again... etc. It does not start up to Windows.  It's giving me the message "Bios recovery 500".  

My pc doesn't respond to any keys (like ESC or F10).

I already reset the cmos. Also downloaded a previous bios version to a usb stick and then started my pc via the bios on the usb. This didn't work.

Does anyone know what else I can try to get out of the loop of bios recovery?

 

Thanks,

Daan

1 REPLY 1
Grzwacz
Level 12
Level 12
6,774 6,758 638 1,525
Message 2 of 2
Flag Post
HP Recommended

Hi,

 

A BIOS update using the HP Support Assistant can sometimes cause your problem.

 

This HP Support site (Link) provides options to recover from a bad BIOS update. You have tried many options available to fix this. You may have to contact HP Support. 

 

Your PC is out of warranty so it may be expensive (cost to fix this problem may exceed the benefit) to fix this.

 

Regards

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation