cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
Rohit73
New member
1 0 0 0
Message 1 of 2
292
Flag Post

System not turning on

HP Recommended
HP Pavilion p6531in Desktop PC
Linux

hello, my computer is not turning on .... it only shows power on light and not showing second light .... and the screen is totally blank ... please help me... I have removed all the accessories and then turn on but it does not resolve the issue ... I have also replaced the thermal paste but does not resolve the issue ... please help me.

1 REPLY 1
Dilip_18
HP Support Agent
HP Support Agent
2,759 2,757 92 99
Message 2 of 2
Flag Post
HP Recommended

Hi@Rohit73,

 

Welcome to the HP Support Community! I'd like to help!

 

I see you are experiencing issues with the HP Pavilion Desktop PC not turning on. I apologize for the Inconvenience.   

 

The BIOS can be corrupted during normal operation from a failed BIOS upgrade, or damage from a virus.   

 

Recover the BIOS using a key press combination. 

 

Turn off the computer. Press and hold the Windows + b keys, and continue to press those keys while you press and hold the power button for 2 to 3 seconds. Release the power button, but continue pressing the Windows + b keys. 

 

The power light remains on, and the screen remains blank for about 40 seconds before anything is displayed. You might hear a series of beeps (usually 8 beeps). Eventually, an HP BIOS Update screen is displayed and the BIOS update begins automatically.

 

After the BIOS is recovered, a Continue Startup button is displayed and a timer counts down. Click the Continue Startup button to restart the computer immediately, or wait for the computer to restart automatically when the timer reaches zero.

 

If the issue persists then it could be a hardware issue. I would request you to contact our HP Support Engineers and should be able to sort this out. HP provides repair or service options for out of warranty products as well. Hence I encourage you to contact HP support for all warranty service options.

 

Please reach out to the HP Technical Support team in your region regarding the service/replacement options.

 

Follow the instructions below to reach them:   

1) Click on this link - https://support.hp.com/us-en/contact-hp  

 

For any hardware issue or repair please click on the link Phone Assist Worldwide

 

Hope this helps! Keep me posted. 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click on the YES button to reply that the response was helpful and/or to say “Thank You”.


Have a great day!

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation