Create an account on the HP Community to personalize your profile and ask a question
11-04-2019 09:50 PM
I was flashing my bios on my system in windows 10 it was updating and windows crashed. Now I just hear beeps nothing on the screen. Tried removing the battery. Tried Holkding Windows Key & B. Tried a clearing the bios via jumpers on the pegatron m2n78-la mother board. Nothing works
11-05-2019 02:12 AM
Hopefully one of these documents will cover (and solve) your problem...
Turn off the computer, and then connect the power cord.
Press and hold the Windows key and the B key at the same time, and then press and hold the power button for 2 to 3 seconds.
Release the Power button but continue pressing the Windows and B keys. You might hear a series of beeps.
The HP BIOS Update screen displays and the recovery begins automatically. Follow any on-screen prompts to continue the startup to complete the recovery.
HP BIOS Update recovery in progress
If the HP BIOS Update screen does not display, repeat the previous steps but press the Windows key and the V key. If the screen still does not display, your computer might not support the feature or there is a hard drive issue. Continue to the next step to install a BIOS recovery file from the HP website.
If the Power light turns off, the Power button was held too long. Repeat the previous steps, making sure to hold the button for only 2 to 3 seconds.
11-05-2019 03:35 AM
Did all this stuff before trust me searched the web for hours. All the stuff shown is for notbooks. I found the latest bios update file but when I click it it doesn't give and option to create a usb recover drive.
Here is the link
Stumped on this.
Didn't find what you were looking for? Ask the community