-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Desktop Hardware and Upgrade Questions
- 2234 heci error

Create an account on the HP Community to personalize your profile and ask a question
08-14-2017 02:06 AM - edited 08-14-2017 04:21 AM
Hp Compaq Elite 8300 Microtower
Bios version 2.9
2234 heci error during initialization-
"The computer is booting up with this error BIOS has been updated but the error persists"
The computers used in the official apartment began to give the same error. Bios update, restore to bios factory settings The same malfunction continues. In that case we have 10 computers.
08-15-2017 01:24 PM - edited 08-15-2017 02:15 PM
I have exactly the same problem. Check in your BIOS if the Intel Management Engine (ME) says N/A. I think that's the problem and I do not find how to fix it.
If your Intel Management Engine is OK then just upgrade your BIOS and your ME to the latest version and that should fix the problem
08-17-2017 01:33 AM
Thank you for your answer. There is 1 jumper on the motherboard. I could not find the place you said. If I set a jumper in my "ME/AMT flash overrride" pins I couldnt find it.
I could not find any other jumper in the red ring.
08-17-2017 02:17 AM - edited 08-17-2017 11:56 PM
First you need to check in your BIOS if the ME is not available. I have a Z230 so it is different from your 8300.
You can check here: http://h10032.www1.hp.com/ctg/Manual/c03612798
In page 30 you can find how to disable AMT/ME
In page 307 you can find some other AMT info. (I am gonna try this when I get home, the Ctrl+P thing)
08-25-2017 05:15 AM
My problem is still unresolved.
I expect a new defective computer to come. The BIOS version 2.18 on the motherboard, I will try to do the upgrades one by one, I did not fix the problem directly when downloading 2.71. I write the result.
I expect your help and comments to work well.
06-28-2018 09:50 PM - edited 06-28-2018 09:59 PM
Sup every one, the way to fix that persistent 2234-heci error is reflashing your bios via epron, not via windows, on prodesk 600 g1 works for me. and u just need to erase and rewrite the chip, cheking its integrity. That gave me problems to rewrite the chip in ep programmer.
I hope that help... my problem is just solved, and i tryed to update and downgrade bios via flash on windows with hp program (sp4324xx archives) and nothing solved.
Just that way i said.
C ya.
Doutor PC
Varginha salveee et city!
Doutor PC_VGA na soluçao das dores de cabeças do t.i. perdidos nos foruns gringos 😄