32gb of Time tech ram ram screen problem.

[TRasta]

32gb of Time tech ram ram is registering in my 2022 HP all in one , that I just upgraded to from 8gbs o ram fand now my screen looks like $@@&.I tried reinstalling back to 8gbs and now same issue! Please help! I need it for I business.

[Kuroi_Kenshi]

HI @TRasta,

Welcome to the HP Support Community! 

Thanks for reaching out about your query regarding screen issues after RAM upgrade on HP All-in-One!

We're thrilled to have the opportunity to assist you and provide a solution.

Try these steps:

Check RAM Compatibility

1. Verify Specifications: Ensure that the 32GB Time Tech RAM is compatible with your HP All-in-One model. Check the manufacturer's website for exact specifications.
2. Ensure Proper Installation: Make sure the RAM modules are properly seated in their slots. Reinstall them if necessary and ensure they click into place securely.

BIOS Update

1. Update BIOS:
   • Visit the official HP Support website: HP Drivers and Downloads
   • Enter your model number and download the latest BIOS update.
   • Follow the on-screen instructions to update your BIOS.

Reset BIOS Settings

1. Enter BIOS Setup:
   • Restart your computer.
   • Press Esc or F10 repeatedly during startup to enter the BIOS setup.
2. Restore Defaults:
   • Within the BIOS menu, select the option to restore default settings.
   • Save changes and exit.

Check Display Connections

1. Inspect Cables and Connections: Ensure that all display cables are securely connected and there are no signs of damage.
2. Use External Monitor: Connect an external monitor to your All-in-One to check if the display issues persist. This could help identify if the problem is with the internal display.

Update Graphics Drivers

1. Update Drivers:
   • Visit HP Drivers and Downloads and search for the latest graphics driver for your model.
   • Download and install the driver according to given instructions.

aPerform a Hard Reset

1. Hard Reset:
   • Turn off your computer and unplug it from the power source.
   • Disconnect all peripheral devices.
   • Hold the power button for 15 seconds to discharge any remaining power.
   • Reconnect and turn on your computer.

I hope this helps.

I'm glad I could help! 😊 If this resolved your issue, please mark it as "Accepted Solution" and click "Yes" on "Was this reply helpful?" Your feedback not only keeps us going but also helps others find the solution faster! 👍✨

Take care and have an amazing day ahead! 🚀

Best regards,