3600mhz ram showing as 2400 only after Upgrading .. urgent help ls

[Abdulwakil]

I upgraded My PC Stock memory, from (Hynix 32GB  4*8   2400mhz) to (T-force Night Hawk 32GB    2*16    3600mhz)

and it's shown as 2400mhz only

i changed the slots but the problem wasn't solved

help me please

[old_geekster]

@Abdulwakil , welcome to the Community.

The memory in your motherboard is limited to DDR4-2400 MHZ.  Here is the Motherboard Specifications page: https://support.hp.com/us-en/product/omen-by-hp-880-100-desktop-pc-series/18695893/document/c0581192...

Look at the section titled "Memory/Memory upgrade information".  It shows the memory is DDR4-2400.  For you to be able to use DDR4-3600 memory, HP would have had to add XMP's to the BIOS/UEFI: https://www.pcgamer.com/what-are-xmp-profiles-and-how-do-i-use-them/

The standard speed of memory is 2133 MHz.  Therefore, HP has added a XMP to increase the speed to 2400 MHz, but not beyond this speed.

Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.