cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
Level 1
14 11 0 0
Message 1 of 8
11,832
Flag Post
HP Recommended

Solved!

Adding SSD to ProDesk 600 SFF: Where do I find the correct install hardware?

I have purchased the ProDesk 600 SFF. I want to add an SSD in the 2.5" bay and retain the 3.5" hard drive.

 

In reading the service manual regarding installing a 2.5" drive, page 121 says "Install four black and blue M3 isolation mounting guide screws." 

 

The manual says: 

"NOTE: M3 metric isolation mounting guide screws can be purchased from HP."

 

Questions regarding adding the 2.5" to a ProDesk 600

1. How do I purchase these from HP?

2. Are the threads of these screws consistent with most SSD's, specifically Samsung?  I have read conflicting info on the web (wow, conflicting info on the web? That's shocking!!)

3. If HP's screws are somehow proprietary, what screws can be used with off-the-shelf SSD's (thread and length, please)?  ( I'd be happy to buy one of the SSD's that HP sells on their website, but their prices aren't consistent with other currently available units by a factor of at least 50%) 

 

Thanks in advance for suggestions/answers

7 REPLIES 7
Highlighted
Level 17
Level 17
47,096 41,348 4,513 11,818
Message 2 of 8
11,825
Flag Post
HP Recommended

Solved!

Adding SSD to ProDesk 600 SFF: Where do I find the correct install hardware?

Your small form factor desktop PC does not have much in the way of extra space so you will have to be inventive. The simplest method wil be to use double sided tape and just to put the drive in a location where it won't touch anything electrical. You may need and adapter to connect power to the SSD. 

 

There won't be room in the 3.5" bay with the original spinner hard disk installed.

 

You can, optionally, remove the DVD drive and put the SSD in that space with a small piece of double sided tape to secure. Most SSD makers sell adapters that enable you to put the 2.5" SSD in a 3.5" bay. Since the 2.5" SSD devices are so thin and light, that would seem to be overkill.

 

 

 

 




I am not an HP Employee.
You can click on Accept as Solution if my post or reply was the information you were looking for that helped you resolve your issue.
You can say thanks by giving me a Kudo if my reply helped. To give a Kudo just click on the


#HelpStopTheSpread #PracticeSocialDistancing distancing
0 Kudos
Highlighted
Level 1
14 11 0 0
Message 3 of 8
11,823
Flag Post
HP Recommended

Solved!

Adding SSD to ProDesk 600 SFF: Where do I find the correct install hardware?

Thanks for your rapid response...the SFF actually has a 2.5" bay under the slim optical drive.

 

 The challenge is that it requires very specific screws to mount the drive, something HP calls " M3 metric isolation mounting guide screws." In a private message I've learned where to call to inquire of HP Parts. But info on the web is conflicting; it's not clear whether the screws are coarse or fine, which is an important distinction. Most off the shelf SSD's are fine thread, and if HP's are coarse, I am looking for a work around.

 

The manual I referenced is here:

 http://www.manualslib.com/manual/550220/Hewlett-Packard-Prodesk-600.html?page=92#manual

 

Thanks again for your reply.

0 Kudos
Highlighted
Level 17
Level 17
47,096 41,348 4,513 11,818
Message 4 of 8
11,818
Flag Post
HP Recommended

Solved!

Adding SSD to ProDesk 600 SFF: Where do I find the correct install hardware?

Ok. 

 

SSD drives are shockproof. That makes them very unlike electromagnetic legacy hard disks, which can be destroyed easily by being bumped or dropped.  That is why many people just use double sided tape.  This is an Occam's razor solution.

 

 




I am not an HP Employee.
You can click on Accept as Solution if my post or reply was the information you were looking for that helped you resolve your issue.
You can say thanks by giving me a Kudo if my reply helped. To give a Kudo just click on the


#HelpStopTheSpread #PracticeSocialDistancing distancing
Highlighted
Level 1
14 11 0 0
Message 5 of 8
11,813
Flag Post
HP Recommended

Solved!

Adding SSD to ProDesk 600 SFF: Where do I find the correct install hardware?

Thanks...I agree that it (or velcro) is a fantastic solution!! And so obvious, I didn't think of it, so I really appreciate your quick reply.

0 Kudos
Highlighted
Level 10
1,930 1,885 174 543
Message 6 of 8
11,338
Flag Post
HP Recommended

Solved!

Adding SSD to ProDesk 600 SFF: Where do I find the correct install hardware?

I just got 8 of those special SSD-compatible screws..... yes, they are M3 fine threads.  Standard hard drives all use #6 - 32 threads per inch (aka 6-32 machine screws), and the SSDs and optical drive screws are M3.

 

Why that was done I don't know, but that is the way it is.

 

So, the odd "slider' type of screw mounts that have a blue shock absorber, a silver slider, and black screw with big internal black washer as part of the assembly are for SSDs/optical drives, with M3 threading, and those are hard to find even on eBay.

 

For the hard drive slider mounts the screws and that washer are silver like with the slider part, and the bumper part is blue.  Those are 6-32.

0 Kudos
Highlighted
Level 1
17 12 0 0
Message 7 of 8
9,327
Flag Post
HP Recommended

Solved!

Adding SSD to ProDesk 600 SFF: Where do I find the correct install hardware?

I found nice fitting M3 mounting screws on eBay: http://www.ebay.com/itm/SSD-BLACK-ISOLATION-MOUNTING-SCREWS-M3-for-HP-/191851923033

 

Now I have both my 2.5" SSD and facotry 3.5" drive mounted in the case of my ProDesk 600.

 

0 Kudos
Highlighted
Level 1
17 12 0 0
Message 8 of 8
9,324
Flag Post
HP Recommended

Solved!

Adding SSD to ProDesk 600 SFF: Where do I find the correct install hardware?

Those scews are not for SFF drives. The SFF drives require M3 screw: http://www.ebay.com/itm/SSD-BLACK-ISOLATION-MOUNTI​NG-SCREWS-M3-for-HP-/191851923033

0 Kudos
Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation