-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Desktop Hardware and Upgrade Questions
- Adding hard drive to hp ryzen 5 M01-F0024

Create an account on the HP Community to personalize your profile and ask a question
06-29-2020 05:27 PM
Have a new ryzen 5 hp desktop. Has 256g ssd storage. Would like to add a hard drive to it. Is there a sata connection on the erica2 motherboard to do this and a power connection available for the drive from the power supply?
thanks
Solved! Go to Solution.
Accepted Solutions
07-02-2020 11:27 AM
Hey, as it turns out there was a sata cable and power to add the hard drive. The drive fit on the bracket in the pc but after screwing it in i realized it road too high to get the lid back on. Repositioned lower and used the checker board holes in the bracket to re attach Fired it up and the pc saw it as drive E Habe attached pics of the motherboard and the hard drive installed (on the position it was too high in)
06-30-2020 02:31 PM - edited 06-30-2020 02:45 PM
The HP M01-0024 specifications are shown here.
Because the link to the Erica motherboard picture is "broken" ERROR 404, I am unable to view it. Please remove the power cord and do the following, reporting back. The current specs list are 1) M.2 device, 256 GB PCIe® NVMe™ SSD, 2) DVD drive. 3) 180W PSU.
About the PSU: it supplies power to the motherboard (main and auxillary, and fan. Only the 400W and 500W units have a 6+2 PCIe power plug. The motherboard supplies DVD and drive power.
I would really like a few pictures, full view of board, and the rear of the unit.
1) Follow the DVD drive power and SATA data cables to the motherboard.
2) There should be a 2x2 HDD power header and 2 unused SATA data headers. The power cable is likely missing as you bought a model without a hard drive. This is the cable,
You would need a 3.5" to 2.5" drive caddy to install a 2.5" SSD drive.
HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.
07-02-2020 11:27 AM
Hey, as it turns out there was a sata cable and power to add the hard drive. The drive fit on the bracket in the pc but after screwing it in i realized it road too high to get the lid back on. Repositioned lower and used the checker board holes in the bracket to re attach Fired it up and the pc saw it as drive E Habe attached pics of the motherboard and the hard drive installed (on the position it was too high in)
07-03-2020 02:16 PM
Glad it worked for you. Nice internal pic.
HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.