-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Desktop Hardware and Upgrade Questions
- Adding second SATA HDD

Create an account on the HP Community to personalize your profile and ask a question
09-28-2017 03:16 PM
Like to know if I can add second SATA HDD to the system.
Solved! Go to Solution.
Accepted Solutions
09-28-2017 07:07 PM - edited 09-28-2017 07:10 PM
Hi
You could buy a PCIE SATA adapter if you don't have a discrete graphics card installed in the available PCIe x16 slot on your motherboard.
Please see here for an example of one for sale at Amazon.
Grzy
09-28-2017 04:58 PM
Hi v2e2
You can review HP's hard drive replacement instructions at this link.
It would appear you may not be able to add a second HDD because your motherboard has two SATA connectors and your PC is using two SATA connectors (primary HDD and a CD/DVD drive).
I could be mistaken. This is what the specs show at your PC's Support site.
Grzy
09-28-2017 07:07 PM - edited 09-28-2017 07:10 PM
Hi
You could buy a PCIE SATA adapter if you don't have a discrete graphics card installed in the available PCIe x16 slot on your motherboard.
Please see here for an example of one for sale at Amazon.
Grzy
09-29-2017 07:02 AM
Hi v2e2
You are welcome.
The lubin motherboard does have an M.2 socket for adding a PCIe 3x4 NVME SSD. It is near the 24 pin ATX power supply connector.
That would be a better option as you will get faster data transfer rates.
It also looks like it may not be possible to add a second SATA HDD or SSD. It is hard to tell from the HP Servicing Guide. It looks like there is room for a second drive on the drive cage.
Grzy
09-30-2017 09:05 PM - edited 09-30-2017 09:51 PM
Hi v2e2
The MB has the required hardware.
I would hope HP has programmed the BIOS to support booting to a PCIe 3x4 NVME drive. This may be included in the BIOS now.
It should work as a data drive. You should install the NVME driver provided by the drive manufacturer after installing the new drive. You don't have to use the manufacturer driver as Windows 10 will provide a generic NVME driver.
You would have to check the BIOS to see if this drive appears as a bootable device.
HP has a BIOS update for your motherboard SSID (82F2) here. The fix is a security enhancement. No additional support for devices is included in this BIOS update.
Grzy