CPU Part Number

[roymg1]

I just purchased a HP CPU Fan with a sink part number 644724-001 for a HP PC h8-1360t 1.00.

Is the fan the correct part number for this PC and also no heat sink goop came with the unit but there is a

plastic cap on the bottom of sink. Is the goop pre-applied under this cap?

Thanks

[Grzwacz · Accepted solution]

Hi

The HP fan/heatsink should work on your PC (HPE h8 1360t CTO- B4J27AV). Your product is on the list of supported products.

Pull the plastic from the bottom of the heatsink to check for pre-applied thermal compound.

You may have to buy Arctic Silver or MX-4 if no thermal compound is present on the heatsink heat spreader.

Remove the existing thermal compound from the CPU. Apply new thermal compound only to the CPU if there is no pre-applied thermal compound on the heatsink.

Tom

[roymg1]

Just a follow up,

I just removed the new fan from the new heat sink and replaced just the fans. So far much less noise and vibrations.

[Grzwacz]

Hi roymg1

Sounds good.

You can always replace the heatsink if needed.

Tom