Can I used an MS-4365 Rev. 1.1 Z Turbo Drive PCIe SSD Adapter in my HP Micro G7 N40L NHP AP Server

[Grizzly47CA]

I have upgrade my power supply  and RAM in my HP Micro G7 N40L NHP AP Server so I could install a Low Profile AMD 2 GBit Graphics card. 

Can I install an MS-4365 Rev. 1.1 Z Turbo Drive PCIe SSD Adapter (256GB M2 SSD)?

[BeemerBiker]

Do not think it will work.

The spec for the server calls references only 2 port  but also mentions port "2-2" for use with a management card.

That management card is part number 615095-B21

I found that part at NewEgg and it fits in an x1 slot but uses additional  socket behind the x1

https://www.newegg.com/hp-615095-b21/p/N82E16816401170

If it is really a PCIe X4 physical socket then it might work.  You need to peek under the hood and see fi the socket is a single length X4 

Even then, there is no telling if the "missing pins" have something to connect to if a real x4 card is pushed in.

Good Luck