Showing results for 
Search instead for 
Did you mean: 
New member
1 0 0 0
Message 1 of 2
Flag Post

Case Swap?

HP Recommended
HP Pavilion TP01-1036

I was wondering if there is a specific case I can swap for the current one on this model? I want to add a graphics card but the current case won't allow it. Thank you in advance.

Level 15
Level 15
12,842 12,635 1,774 5,014
Message 2 of 2
Flag Post
HP Recommended


You can not.

1) The rear of the case is cutout to accept the motherboard outputs.  So, there is actually no rear I/O plate.

2) HP has  proprietary designed PSU. It does not conform to the ATX screw pattern.

3) Front power switch attached to the front panel pinout on the motherboard. Do you know the wiring of pins?


The HP TP01-1036 has a 180W.  It can accept a 500W PSU (HP L05757-800).

What is your exact issue?

This system is feedback driven thru Solution and Kudo flags. It's the only means of knowing if you have been served. Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..

HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation