cancel
Showing results for 
Search instead for 
Did you mean: 
Joschix101
New member
1 0 0 0
Message 1 of 2
113
Flag Post

Change PWM to DC mode in the omen Bios simulator

HP Recommended
Omen Desktop 875-1306ng
Microsoft Windows 10 (64-bit)

Hi,
i added 3 fans to my omen 875-1306ng Desktop. 
The fans are the corsair sp120 rgb, which have 3-pin. The problem is, that the fans are spinning on 100% not important what im doing. I think thats because my Motherboard is set to pwm (4-pin) and not to dc (3-pin) mode, but im not sure. Unfortunately i found no way to configure that in the "bios simulator". 
Is there any way to configure it there? Or is there another "bios", in which i can do more than setting the language etc and boot options? 

Have a nice day

1 REPLY 1
Prométhée
Level 16
Level 16
3,546 3,504 383 1,533
Message 2 of 2
Flag Post
HP Recommended

Hello

http://h10032.www1.hp.com/ctg/Manual/c06515447.pdf
if you have the bios like here, no, nothing more ..
If the control of the fans is not possible because they are not suitable:
either try with software, maybe the manufacturer provides one ..
Otherwise, you will have to find a suitable model that matches the connectors!

I don't think too much, but can check this out:

 HP OMEN Gaming Hub


Expert volontaire :Forum Fr 17-10-2009 :

Please remember to mark the answers this can help other users:
please click on the accept as solution button if message provided an answer to the problem

Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation