Cooler master hyper 212 evo

[AndrewHe1]

I have a hyper 212 Evo from cooler master. I'm wondering if I can just install it on my hp omen 880-p1xx without having to remove the entire motherboard to remove the backplate. 

[Garp_senchau]

@AndrewHe1, Welcome to HP Support Community,

Thank you for posting your query; I’m here to help by guiding you through steps to resolve this issue

Installing the Cooler Master Hyper 212 EVO on your HP Omen 880-p1xx without removing the motherboard depends on the existing mounting system. The Hyper 212 EVO typically requires a backplate to secure the cooler, and most systems, including pre-built ones like the HP Omen, require you to remove the motherboard to install this backplate. However, if your current cooler uses a compatible backplate, you may be able to reuse it and avoid removing the motherboard. If not, you’ll likely need to remove the motherboard to install the new cooler properly.

I hope this helps.

Take care and have a good day. 

Did we resolve the issue? If yes, please consider marking this post as "Accepted Solution" and click "Yes" to give us a helpful vote - your feedback keeps us going!

Regards,

[AndrewHe1]

Hello, I'm using the stock cooler that came with my omen 880 but when I removed the motherboard, the backplate seems to be glued on and I cannot seem to take it off. My temperatures keep reaching 100°C and it is really worrying for me.

[Garp_senchau]

@AndrewHe1, Welcome to the HP Support Community 

  

This needs one-on-one interaction. 

Hence, I'm sending a private message to assist you with the next action. 

  

Please check your Private message icon on the upper right corner of your HP Community profile Next, to your profile Name, you should see a little blue envelope, please click on it or simply click on this link. 

  

I hope this helps! Keep me posted. 

Regards,