DDR upgrade

[AdyUk]

Hi,can I make upgrade from 8ddr to 16ddr to All In One 24-n005-nx?If yes,can somebody tell me how?

Regards , Adrian

[Paul_Tikkanen · Accepted solution]

Hi:

Below is the link to the product specs page for your PC.

https://support.hp.com/us-en/document/c05018331

The memory upgrade info is listed on this page.

2 x 8 GB of memory is supported.

Here is the link to the service manual.

http://h10032.www1.hp.com/ctg/Manual/c04858286

[Grzwacz]

Greetings,

Welcome back to the forum.

I am not a HP employee.

Yes you can upgrade memory from 8 GB  to 16 GB.

Your PC supports the following memory modules:

• Dual channel memory architecture
• Two 204-pin DDR3 SODIMM sockets
• Supports up to PC3-12800 (DDR3-1600)
• Supports 2 GB, 4 GB and 8 GB SODIMMs
• Supports up to 4 GB on 32-bit systems

I suggest you look at Crucial Memory (Link). Crucial guarantees purchased memory will work in your PC. HP Part Surfer (Link) does not show 4 GB or 8 GB memory modules available for purchase.

Please see this (Link to the HP Services Media Library) describing the service procedures required to install memory modules in your system.

Select the following at the HP Services Media Library :

Desktops,

Envy Desktops,

Envy 24-n000 Envy AIO Desktop,

Select "Service Procedures",

Select "System Memory" and enable Flash.

Watch the video.

Regards

[Grzwacz]

Hi,

No response when starting the above reply.

I am a very slow typist. 

Regards

[AdyUk]

Thank you so much !!!

[AdyUk]

Thank you so much!!!

[Paul_Tikkanen]

You're very welcome.