DVD Writer replace

[DT1956]

Current DVD writer is GUD1N - HP#  849055-6C7  Could I replace it with a GUD1N - HP# 849055-6F7

These are both GUD1N dvd drives but the bezels are different. Can the bezels be swapped?

[Hawks_Eye · Accepted solution]

Hi @DT1956 

Welcome to the HP Support Community!

Thanks for posting your query! We're here to help you get back up and running.

It looks like both DVD writers—GUD1N - HP# 849055-6C7 and GUD1N - HP# 849055-6F7—belong to the same model series, but their bezels differ. Generally, HP optical drives use snap-on bezels, meaning they can often be swapped if the mounting clips and alignment match.

Here’s what you can do to check compatibility:

Compare the Mounting Clips

• Remove the bezel from your current 849055-6C7 drive.
• Inspect the attachment points and clips.
• Compare them with the 849055-6F7 bezel.

Check the Drive Faceplate Shape

• Some bezels have slight curvature or alignment differences.
• Ensure the new bezel fits flush with the desktop case.

Test the Fit Before Installation

• Try snapping the 849055-6F7 bezel onto the 849055-6C7 drive.
• If it clicks into place securely, it should work.

If the bezels don’t align properly, you may need to find a compatible replacement bezel rather than swapping them.

If my response helped, please mark it as an Accepted Solution! ✅ It helps others and spreads support. 💙 Also, tapping "Yes" on "Was this reply helpful?" makes a big difference! Thanks! 😊

Take care, and have an amazing day!

Regards, 

Hawks_Eye

[Hawks_Eye]

@DT1956 A huge thank you for marking this post as the 'Accepted Solution'! We're thrilled that we could help resolve your issue. 

If you have any more questions or need further assistance, please don't hesitate to ask. We're here to help! 

Thanks again for your confirmation, and we wish you an amazing day ahead! 😊

Regards, 

Hawks_Eye