EliteDesk 800 35W G2 Network Driver issue

[AmalaMaya]

Hi there,

We have got a new device  EliteDesk 800 35W G2 in our office.

In order to get the compatible drivers I'm struggling.

Can any one suggest the latest network drivers for " HP EliteDesk 800 35W G2 " 

Network Driver: Intel(R) Ethernet Connection (2)I219-LM

Pls share me the source for Windows 7 x64.

Thanks in advance!:)

Re,

Amala

[REO51ST]

@AmalaMaya

http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=8741495&swItemId=vc_152893_1&swEnvOid=405...

REO

[AmalaMaya]

Hi thanx for ur prompt reponse

http://h20564.www2.hp.com/hpsc/swd/public/detailsp4ts.oid=8741495&swItemId=vc_152893_1&swEnvOid=4059

It shows as "could not open the page" 😞

Re,

Amala

[REO51ST]

@AmalaMaya

Try again something went wrong when I posted.

I had to log out and log back in.

Sorry.

REO

[AmalaMaya]

tried now... but it shows as above

[REO51ST]

@AmalaMaya

Click on the link on my EDITED post above.

Or here.

http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=8741495&swItemId=vc_152893_1&swEnvOid=405...

REO

[AmalaMaya]

Thanks for that.. I have tried to add the network drivers to the Boot image but no light...

When we start the build it loads the boot image and in winpe it doesnt get the IP.

So I need the exact above compatible drivers..

Awaiting for your reply.

[AmalaMaya]

Can anyone pick this up...

We had a new device EliteDesk 800 35W G2 Desktop mini, We have added the compatible network drivers to Boot image and started the pxe.

In pxe deployment, it can load the boot image,, thats fine

But in winpe it stops with a blank screen, like if I open the cmd prompt and check if the machine gets IP.The machine doent get IP address.

We had stuck with this major issue now

Plz help

Spoiler

[ProITguy · Accepted solution]

Was having the same trouble for weeks. Finally found a driver that works in the boot image (6.3.9600) - Found on Lenovo's site but works on HP EliteDesk 800 G2. Used the Win7/8.1 download. No other drivers seem to work - getting the blank screen because you lack a working NIC driver (press F8 for CMD and run IPCONFIG).

http://support.lenovo.com/us/en/downloads/ds105362

Driver version is 12.13.17.6

[ProITguy]

Someone else wrote that they were able to get these drivers to function in the boot image:

http://whp-aus2.cold.extweb.hp.com/pub/caps-softpaq/cmit/HP_WinPE_DriverPack.html

Source:

https://www.reddit.com/r/SCCM/comments/3vza75/hp_elitedesk_800g2_winpe_no_network/