• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Locked

‎09-04-2019 08:19 AM - edited ‎09-04-2019 08:20 AM

HP Recommended
Product: Envy 750-514
Operating System: Microsoft Windows 10 (64-bit)

What is the maximum wattage available to upgrade the graphics card on an Envy 750-514.

Is there any reason why a AMD Radeon Pro WX-2100 single slot powered card (drawing 30 watts) would not work?

1 ACCEPTED SOLUTION

Accepted Solutions

‎10-29-2019 05:48 PM

HP Recommended

@DfRobicaux,

You likely need to turn off Secure Boot. 

Read down to installing new hardware.

This system is feedback driven thru Solution and Kudo flags. It's the only means of knowing if you have been served. Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..

HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.

View solution in original post

Was this reply helpful? Yes No
7 REPLIES 7

‎09-04-2019 10:34 AM

HP Recommended

@DfRobicaux,

Usually there is a reason for this inquiry other than what you asking !  What is the intent? Cards are chosen for a purpose.

This system is feedback driven thru Solution and Kudo flags. It's the only means of knowing if you have been served. Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..

HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.
Was this reply helpful? Yes No

‎09-04-2019 08:28 PM

HP Recommended

The intent is to confirm that an AMD Radeon Pro WX-2100 will fit and not have issues if installed in the referenced system.

I wanted to use sketchup but it doesn't run on this machine with HD620 integrated graphics. Also if I understand correctly, since I use Revit most of the day as a small firm architect,  this card would work for this application much better than a gaming card. In addition this would allow me to drive 1440p displays. 

Was this reply helpful? Yes No

‎10-29-2019 03:31 PM

HP Recommended

Will an Envy Desktop with a Odense2-K motherboard, I5 chip and 12 gb of ram run a AMD Radeon pro WX3200 pulling less than 50 watts? I have loaded change the bios on the HP to legacy boot, but the monitors still doe not receive the signal from the wx3200 card. The motherboard currently has intergrated graphics. Need help as AMD isn't sure if the HP Envy computer will support the graphics card.

Was this reply helpful? Yes No

‎10-29-2019 05:48 PM

HP Recommended

@DfRobicaux,

You likely need to turn off Secure Boot. 

Read down to installing new hardware.

This system is feedback driven thru Solution and Kudo flags. It's the only means of knowing if you have been served. Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..

HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.
Was this reply helpful? Yes No

‎10-30-2019 03:46 PM

HP Recommended

Turned off the Secured Boot, but the intergrated video controller is still working and the PCI card is not.

 

Would changing the setting in the Bios PCI VGA Configuration allow the card in the PCI slot to work?....it is currently set as follows:

ATI VGA Controller: Non-boot device

Intel VGA Controller: Primary VGA device

Was this reply helpful? Yes No

‎11-01-2019 03:55 PM

HP Recommended

Issue was the BenQ monitor had to have the input switched from HDMI to Display Port input. The HP is happy and running smooth with the workstation card.

Was this reply helpful? Yes No

‎11-02-2019 04:19 PM

HP Recommended

@DfRobicaux,

Not only are you happy. but your making me glad !!!

This system is feedback driven thru Solution and Kudo flags. It's the only means of knowing if you have been served. Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..

HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.
Was this reply helpful? Yes No
Warning
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
Didn't find what you were looking for? Ask the community
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.