HP 8200 Elite front io connector layouts

[Hrvyy]

Hi there,

I am looking to do a case swap on a HP 8200 Elite that i have ordered but don’t know what the layout of the front panel io is, could someone send a picture/configuration of what connector goes where.

Many thanks

[NonSequitur777]

@Hrvyy,

There are three HP 8200 Elite PCs with a front panel: USDT, SFF and MT, and then there's also the HP 8200 Elite AIO (which I'm sure you're not interested in): 

Link: https://support.hp.com/rs-en/document/c02781659

Link: https://support.hp.com/us-en/document/c02781693

Link: https://support.hp.com/us-en/document/c02781555

Hope this helps.

Kind Regards,

NonSequitur777

[Hrvyy]

Hi there, could you send me the motherboard pin layout for front connectors aswell thanks

[NonSequitur777]

@Hrvyy,

Very challenging to find HP-sanctioned/vetted information.

However, please take a look at these three links, and see if the information you are seeking is listed there:

A.) HP 8200 Elite SFF Illustrated Parts & Service Map: http://h10032.www1.hp.com/ctg/Manual/c02741915.pdf

B.) HP Maintenance and Service Guide for 8200 Elite Series -see Chapter 8, Table 8-1 on pages 176-7: http://h10032.www1.hp.com/ctg/Manual/c04224518.pdf

C.) HP Technical Reference Guide for HP 8200 Elite Desktop Computers, see Table 7-7 and Figure 7-2+7-3: System Board Header Pinouts: http://h10032.www1.hp.com/ctg/Manual/c02778024.pdf

Hope this helps.

Kind Regards,

NonSequitur777