-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Desktop Hardware and Upgrade Questions
- HP DeskPro 400 G4 Desktop Mini - M.2. SATA Support

Create an account on the HP Community to personalize your profile and ask a question
04-11-2024 04:50 PM
I am trying to connect a ssd disk through the m.2 slot to my mini pc, but the bios does not recognize it directly.
I had a ssd connected through the sata connector, it work correctly. I figured there might be some limitation for the use of both and I also tried disconnecting the disk from the sata slot. But still the m.2 disk is not recognized.
I have tried with two different m.2 disks, first with a WD Black SN750 (WDS250G3X0C) and then with a Crucial (CT500P3SSD8). This last one according to the Crucial page is also compatible with my computer.
Could someone help me to analyze this problem?
Solved! Go to Solution.
Accepted Solutions
04-16-2024 09:44 AM - edited 04-16-2024 09:47 AM
Have you checked to ensure that M.2 SSD option in the BIOS is enabled?
See this manual
https://hp.it-shop.bg/uploaded/6/2/ProDesk-400-G4-DM-MSG.pdf
Chapter 5 Computer setup (F10) Utility
Power on and tap the F10 key to invoke the BIOS
Go to Computer Setup-Advanced
I am volunteer forum member. If my suggestion helped you solve your issue, help others by marking that post as the accepted solution. Say thanks by clicking on the Yes button next to the "was this reply helpful?"
04-16-2024 09:44 AM - edited 04-16-2024 09:47 AM
Have you checked to ensure that M.2 SSD option in the BIOS is enabled?
See this manual
https://hp.it-shop.bg/uploaded/6/2/ProDesk-400-G4-DM-MSG.pdf
Chapter 5 Computer setup (F10) Utility
Power on and tap the F10 key to invoke the BIOS
Go to Computer Setup-Advanced
I am volunteer forum member. If my suggestion helped you solve your issue, help others by marking that post as the accepted solution. Say thanks by clicking on the Yes button next to the "was this reply helpful?"