HP F3009A 8AB6 Erica 9 - is 2 X Crucial 8 GB DDR4 UDIMM 3200 CL22 kit OK?

[Lorry8670]

Hello

I bought the HP F3009A  with Erica 9 motherboard - 8AB6. (Australia) recently. (I'm not a computer expert).

The PC came with one Micron 8 GB ram only. I want to buy a RAM kit: 2 X Crucial Micron 8 GB DDR4 UDIMM 3200 CL22 kit.

I'm happy with 16 GB. Task Manager says speed is 3200 MT/s.

CPU-Z report says CAS latency is 22 clocks so this seems right. Speccy has 1595 MHz for the existing RAM.

There doesn't seem to be a way to contact HP officially and ask them directly on RAM compatibility.

I'd appreciate any advice whether or not this RAM would be compatible. Thanks.

[Garp_senchau]

@Lorry8670, Welcome to HP Support Community,

Thank you for posting your query; I’m here to help by guiding you through steps to resolve this issue

Memory upgrade information

Dual channel memory architecture (One DIMM per channel)

Two DDR4 UDIMM (288-pin) sockets

Supports up to PC4-25600 (DDR4-3200)

Supports 4 GB and 8 GB DDR4 UDIMMs

Supports up to 4 GB on 32-bit systems

note:

32-bit systems cannot address a full 4.0 GB of memory.

Supports up to 32 GB (unbuffered) with two 16 GB DIMMs on 64-bit systems

note:

Maximum memory shown reflects the capability of the hardware and can be limited further in the operating system.

Reference: HP Desktop PCs - Motherboard Specifications, Erica9 | HP® Support

I hope this helps.

Please feel free to reply here if you have any questions or if you need further clarification on any of the steps. 

Take care and have a good day. 

If my response helped, please mark it as an Accepted Solution! ✅ It helps others and spreads support. 💙 Also, tapping "Yes" on "Was this reply helpful?" makes a big difference! Thanks! 😊

Regards,