HP M01-F1002na PSU Upgrade

FE_A · ‎01-22-2021

Hi,

Have a few questions about upgrading the PSU on the M01-F1002na, with the 180W PSU (L70042-002), currently installed. It uses the 7 pin connector, shown in the picture. As far as I know, and looking on the forums, it seems that there is only one official upgrade available for the PSU, a 500W (L05757-800), however this is not available to purchase in the UK. There are other HP PSUs available with the 7 pin connector, such as the 722299-001, would these be compatible with this motherboard? I'm not too bothered if it won't fit in the case, as long as it runs, that's fine with me.

wb2001 · ‎01-24-2021

@FE_A

The HP 722299-001 is a 240W PSU.......... and it will not work.

https://www.directitsource.com/HP-722299-001-240W-Power-Supply-p/722299-001-ds2.htm

This system is feedback driven thru Solution and Kudo flags. It's the only means of knowing if you have been served. Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..

HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.

Create an account on the HP Community to personalize your profile and ask a question