HP Pavilion Gaming TG01-2285t RAM & SSD Upgrades

[Kauaian]

HP Pavilion Gaming TG01-2285t RAM & SSD Upgrades

[Kuroi_Kenshi]

Hi @Kauaian,

Welcome to the HP Support Community! 

Thanks for reaching out about your query regarding your PC!

We're thrilled to have the opportunity to assist you and provide a solution.

Upgrading the RAM and SSD of your HP Pavilion Gaming TG01-2285t can significantly improve performance and storage capacity. Here are the detailed guidelines on how to achieve these upgrades:

RAM Upgrade

Identify RAM Specifications:

• Ensure compatibility by checking the type of RAM supported by your system. The HP Pavilion Gaming TG01-2285t supports DDR4 RAM.

Purchase Compatible RAM:

• Purchase DDR4 RAM with the same or higher speed as your current RAM.
• Maximum supported RAM capacity is up to 64 GB (2 x 32 GB).

Installation Steps:

• Power off your computer and unplug all peripherals.
• Open the side panel of the desktop case.
• Locate the RAM slots on the motherboard.
• Release the clips on both sides of the existing RAM module if you're replacing or adding RAM.
• Align the notch on the new RAM module with the slot and firmly press down until the clips click into place.
• Close the side panel and plug in peripherals.
• Power on the computer and check that the system recognizes the new RAM by accessing the BIOS or checking the system properties in Windows.

SSD Upgrade

Identify SSD Specifications:

• Determine whether you need a 2.5-inch SATA SSD or an M.2 NVMe SSD based on your current hardware configuration.

Purchase Compatible SSD:

• Choose an SSD with the desired capacity (e.g., 256 GB, 512 GB, 1 TB).
• Ensure it is compatible with either SATA or NVMe interface.

Installation Steps:

• Power off your computer and unplug all peripherals.
• Open the side panel of the desktop case.
• Locate the SSD mounting area (for 2.5-inch SATA) or the M.2 slot on the motherboard.
• For a 2.5-inch SSD:
  • Mount the SSD into the bracket provided or a bay designed for 2.5-inch drives.
  • Connect the data cable to the motherboard and the power cable from the PSU.
• For an M.2 SSD:
  • Remove any existing M.2 drive if necessary.
  • Insert the M.2 SSD into the slot and screw it into place.
• Close the side panel and plug in peripherals.
• Power on the computer and follow any necessary steps to clone your old drive or install the operating system on the new SSD.

I'm glad I could help! 😊 If this resolved your issue, please mark it as "Accepted Solution" and click "Yes" on "Was this reply helpful?" Your feedback not only keeps us going but also helps others find the solution faster! 👍✨

Take care and have an amazing day ahead! 🚀

Best regards,