Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Locked

‎02-28-2022 08:41 AM

HP Recommended
Operating System: Microsoft Windows 10 (64-bit)

Is it possible for hp prodesk 400 g6 mt to be able to create a RAID Array between m2 and SATA SSD drives?

Category:
1 REPLY 1

‎02-28-2022 09:37 AM

HP Recommended

@GlennISBT -- my guess is "yes".

 

A RAID array works for a pair of HDD disks, when the HDD come from different manufacturers, and have different capacities.

The speed of input/output is limited to the speed of the slower disk-drive.

A RAID-array works for a pair of "unlike" SSDs.

So, my guess is that having one M.2 and one SSD will work, but at the speed of the slower device.

 

Was this reply helpful? Yes No
Warning
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
Didn't find what you were looking for? Ask the community
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.