• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Join the HP Community Solve‑a‑thon | Help Others & Share Your Solutions | Live on Zoom | 2:30 PM to 2:30 AM IST | Every Wednesday Click here to know more
Locked

‎04-02-2019 03:04 AM

HP Recommended
Product: Omen 870-265na Desktop
Operating System: Microsoft Windows 10 (64-bit)

Is there a quick way to find out how many hard drives I can have in my desktop, without powering down and unplugging everything?

 

I am looking to add a 1 TB SSD as the current 256 GB SSD is almost full as that is where program files are stored.

 

Thanks in advance.

1 ACCEPTED SOLUTION

Accepted Solutions

‎04-02-2019 05:41 AM - edited ‎04-02-2019 05:42 AM

HP Recommended

Yes, that is the easiest option.  Since the present SSD is probably the place where Windows is installed, it would be fairly easy to clone the existing SSD to the new SSD and then all would be as before but on a larger SSD.

Depending on the brand SSD you buy, the migration software might be easy to do.


I'm not an HP employee.
Did this message answer your question? Please indicate below as an Accepted Solution!
Did you find this message useful? Click on the "Was this reply helpful" Yes button.

View solution in original post

Was this reply helpful? Yes No
5 REPLIES 5

‎04-02-2019 03:08 AM

HP Recommended

As for me, I would just either look up the motherboard on Google or look at how many SATA III slots there are. I don't think you need to power down and unplug anything at all. Just have to peek inside the case.

Was this reply helpful? Yes No

‎04-02-2019 05:07 AM - edited ‎04-02-2019 05:09 AM

HP Recommended

Here is the spec page for that model

https://support.hp.com/us-en/product/omen-by-hp-870-200/13687063/document/c05366989/

In looking at the motherboard detail, there are only 3 SATA ports on the motherboard.  Also according to the spec page they are all occupied.  SSD, hard drive and DVD/CD drive.  Therefore, adding an additional drive is not going to be an easy task.  It probably could be done by adding an additional SATA controller if nothing is occupying the single PCIex1 slot, but finding a space for the mounting might be a challenge.


I'm not an HP employee.
Did this message answer your question? Please indicate below as an Accepted Solution!
Did you find this message useful? Click on the "Was this reply helpful" Yes button.
Was this reply helpful? Yes No

‎04-02-2019 05:29 AM

HP Recommended

Thanks for your reply.

 

I guess the easiest thing would be to swap out the current 256 GB SDD for the new 1TB SSD?

Was this reply helpful? Yes No

‎04-02-2019 05:41 AM - edited ‎04-02-2019 05:42 AM

HP Recommended

Yes, that is the easiest option.  Since the present SSD is probably the place where Windows is installed, it would be fairly easy to clone the existing SSD to the new SSD and then all would be as before but on a larger SSD.

Depending on the brand SSD you buy, the migration software might be easy to do.


I'm not an HP employee.
Did this message answer your question? Please indicate below as an Accepted Solution!
Did you find this message useful? Click on the "Was this reply helpful" Yes button.
Was this reply helpful? Yes No

‎04-02-2019 06:00 AM

HP Recommended

Remember about the recovery parition - it will not function correctly on a cloned drive anymore (long story) so you must either (or ideally both):

 

* keep the original SSD

* create recovery media

Was this reply helpful? Yes No
Warning
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
Didn't find what you were looking for? Ask the community
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.