Hi Good day. I am new here. I am enquiring about my Z600 v2 ram upgrade. I was offered 4Rx4 ECC 16gb

[benzmerc6315]

Hi Good day. I am new here. I am enquiring about my Z600 v2 ram upgrade. I was offered 4Rx4 ECC 16gb PC3L 10600R Ddr3 1333mhz. Can these be used on my Z600? Tks

Form Factor: DDR3L 240Pin Reg-DIMM Memory.
Number of Pins:240 pin
Bus Speed:PC3L-10600R DDR3L-1333MHz
Capacity per Module:16GB
Memory Voltage: 1.35V
Buffering/ECC: ECC buffered Serve Memory
LIFETIME WARRANTY

[banhien]

@benzmerc6315 

Please use the following compatible RAM

       https://www.crucial.com/compatible-upgrade-for/hp---compaq/hp-z600-workstation-rev-c2

Regards.

[benzmerc6315]

Hi tks for your reply. I was informed by a person in GreenPCgamer that v2 able to use 16gb up to max 96gb. He confirmed n a few other also experiment with a

Z600 v2. I will wait and see if I can tried 16gb ECC ram on my Z600. Thanks again for your suggestion. 

[benzmerc6315]

Hi Good day. I have another offer. Samsung DDR3 2RX4 also 16gb PC3L 12800. This should be OK right

[benzmerc6315c]

Hi Good Day this is the Ram. 16GB 2Rx4 PCL3 12800R ok to buy for my Z600?

[benzmerc6315c]

Please advice if Z600 v2 will work if I use 1 stick of 16gb ddr3 ram only? Tks

[banhien]

---

@benzmerc6315c wrote:

Please advice if Z600 v2 will work if I use 1 stick of 16gb ddr3 ram only? Tks

---

@benzmerc6315c 

Machine has 6 slots and it supports 48GB max. Very simple calculation 48/6=8 that means the max is 8GB per slot.

Regards.

[benzmerc6315c]

Hi Good Day I not sure if it is a problem.  My PC is Z600.  I ordered a Samsung 16GB pc3l model no M393B2G70QH0 but I received model M471B1573DB0.  But the ram is working fine on the Z600.  I ordered 5 more model M393B2G79QGI earlier.  I informed shipper to change the model to M471 but shipper refused so I have to cancelled the order.  Now my question is M393 and M471m, are they the same or different model cannot be used on the Z600.  I  don't want to end with 5 unusable ram. Please help. Thanks  

[benzmerc6315c]

I try 6 x 16bg on my Z600 and they work fine.  Thanks for your inputs.