How many memory slots are there in Z2 G£ miniworkstation?

[Pietro_M]

I find a sigle slot with heat-sink, but specification and video on HP web site show a different board with two slot.
Crucial website show a board like the mine, with a only socket. So which memory I have to buy to upgrade to 32 Gigabytes?

[old_geekster]

@Pietro_M , welcome to the forum.

Here is the Product Specifications page for the workstation:  https://support.hp.com/us-en/product/hp-z2-mini-g3-workstation/12716708/document/c05338666#AbT6

You should scroll down the page to the section titled "Memory".  It states the following: 

note:

Two channels of DDR4 memory are supported. To realize full performance at least one DIMM must be inserted into each channel.

Also, here is the memory that is recommended by Crucial Memory:  https://www.crucial.com/usa/en/compatible-upgrade-for/HP-Compaq/hp-z2-mini-g3

Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.

[Pietro_M]

Thanks, I read. But when I opened my Z2 G3 I saw a only socket (with a ram module inserted).

Is there a image of where are the two socket? The video on HP site show a different board then mine.

P.

[old_geekster · Accepted solution]

You are welcome, @Pietro_M!  Thank you for the additional information.

Here is the Maintenance and Service Guide for your workstation:  http://h10032.www1.hp.com/ctg/Manual/c05350570

On Page 7, System board components, is a diagram of the system board showing the two memory sockets.  This should help you.

[Pietro_M]

Tnx a lot, I'm silly! The same figure is on a label under the cover...

[old_geekster]

You are welcome, @Pietro_M!  Sometimes we simply can't see what is in front of our noses! 😉  Good luck.