How to increase ram clock speed from 2133mhz to 3200mhz

[keith70]

Hi, please can someone guide me on how to increase ram clock speed after upgrading to corsair vengeance DDR 3200MHz. I've look in the bios but cant find any memory options.

The PC is seeing the upgrade to 32GB but the clock speed is remaining to be 2133MHz

My Pc is:

Omen desktop PC 880-p1

Motherboard = HP MS-7A61 Ver:1.3

Thanks 

[JJOcean · Accepted solution]

The validated RAM speed for your system is DDR4 2400. DDR4 3200 is default at 2133 unless you have XMP in the BIOS settings. If you do not see XMP in the settings and a new BIOS does not add that additional setting than you will continue to run at 2133.

[keith70]

Thank you for responding & the very clear explanation.

[JJOcean]

Glad to help out!

[TODDMR]

I personally have an OMEN 875-1131 desktop. I bought TeamGroup 3200mhz memory and was only seeing 2400mhz. The Omen Command Center did not show overclocking for the ram. Doing some research I installed the Intel XTU software and messed with my memory clock settings. This is what personally got me to 3200 mhz memory showing in Task Manager.

In Intel XTU change the following:

Memory Multiplier= 32x

Memory Clock Multiplier = 1.00x (this is auto set when going over 20x for the above setting)

Memory Voltage = 1.35v (this was the setting on my ram modules. use the one for yours)

When I apply the setting the system reboots a couple times and sure enough everything shows this speed now. I am attaching the screenshot from task manager on this. I never used Intel XTU before so this was a learning curve for me.

Hope this will help others. You will get a warning when you go to install Intel XTU, but I told it to install anyhow.

[JJOcean]

Great information and thanks for sharing it!