How to open up HP ENVY Curved All-in-One - 34-b000na

[John_1994]

Fellow Techies

We are trying to take apart the HP ENVY Curved All-in-One - 34-b000na

We cannot find any guide online for this Exact model. We have found a similar model which says about removing 14 screens, we can only find 7 on ours. Weve removed the sticker and there are no screws underneath.

We start prizing it off from the edges but it feels like something is still holding this together.

The Upgrading and Servincing guide is pointless: http://h10032.www1.hp.com/ctg/Manual/c06102824

Please help!

[Paul_Tikkanen · Accepted solution]

Hi:

See if these video guides are of help to you...

http://h20574.www2.hp.com/results.htm?SID=13823530&MEID=124573FC-B60B-466C-95D6-2E3673F4A830

[John_1994]

---

@Paul_Tikkanen wrote:

Hi:

See if these video guides are of help to you...

http://h20574.www2.hp.com/results.htm?SID=13823530&MEID=124573FC-B60B-466C-95D6-2E3673F4A830

---

Thanks Paul, we tried following these, but when we remove the sticker there are no screws below it, this is what we found strange!

[Paul_Tikkanen]

You're very welcome.

Sorry those guides weren't of help to you.

Unfortunately, i don't have any other suggestions for you.

[John_1994]

---

@Paul_Tikkanen wrote:

You're very welcome.

Sorry those guides weren't of help to you.

Unfortunately, i don't have any other suggestions for you.

---

Hi Paul

you was right actually, under the sticker there is like another sticker under that one which when you peal off you get the other 7 screws

[Paul_Tikkanen]

Glad the video was the correct one.

They sure make these PC's hard to take apart nowadays!

Stickers on top of stickers?   Yikes!