10-28-2019 06:16 PM
Went online to find a manual that shows assembly and disassembly of the device.
Didn't find a manual.
So far, I have removed the side cover.
I have removed the front panel.
The hard drive is in a "cage" at the bottom of the front side of the tower.
I removed two screws that secured the "cage" to the case.
Still cannot remove the "cage".
The "cage" seems to have tabs that are in a slot in the case assembly behind where the front cover was.
And there seems to be tabs that secure the "cage" to the case on/near the left side panel (that is still attached to the case).
I am tempted to bend the tabs but I don't think the design would require that.
Help. I'm stuck!
Solved! Go to Solution.
10-28-2019 06:32 PM - edited 10-28-2019 06:34 PM
See if the upgrading and servicing guide on your PC's support page is of help to you...
You can also refer to the service video guide at the link below...
10-28-2019 09:57 PM
My thanks to
Paul_Tikkanen (Level 20) who posted a new reply in Desktop Hardware and Upgrade Questions on 10-28-2019 06:32 PM
"See if the upgrading and servicing guide on your PC's support page is of help to you...
The document you noted was exactly what I needed.
A very fast and totally helpful reply
Thanks again....from fox76