cancel
Showing results for 
Search instead for 
Did you mean: 
murkyemu
New member
3 2 0 0
Message 1 of 6
291
Flag Post

Solved!

I need to replace my motherboard, but i do not know if a new one would fit

HP Recommended

I need help in replacing my mother board. I broke its pins and i am looking for a new motherboard, but i do not know if any mother board like a GIGABYTE B365M DS3H  would fit so please tell me.WIN_20201002_19_14_35_Pro.jpgWIN_20201002_19_17_47_Pro.jpgWIN_20201002_19_24_53_Pro.jpg

1 ACCEPTED SOLUTION

Accepted Solutions
banhien
Level 19
Level 19
94,749 93,406 12,276 26,107
Message 4 of 6
Flag Post
HP Recommended

@murkyemu wrote:

It is a 880-047c

 


@murkyemu 

 

The specs of your machine is

 

              https://support.hp.com/au-en/document/c05697354

 

Its motherboard uses  uATX: 24.0x24.0 cm (9.4x9.4 in) form factor which is uATX standard. All standard uATX form factor motherboards will fit.

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




>

View solution in original post

Was this reply helpful? Yes No
5 REPLIES 5
banhien
Level 19
Level 19
94,749 93,406 12,276 26,107
Message 2 of 6
Flag Post
HP Recommended

@murkyemu 

 

What is your machine ? Some HP machines use different sizes/form factors therefore holes for screws won't line up.

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




>
Was this reply helpful? Yes No
murkyemu
Author
New member
3 2 0 0
Message 3 of 6
Flag Post
HP Recommended

It is a 880-047c

 

Was this reply helpful? Yes No
banhien
Level 19
Level 19
94,749 93,406 12,276 26,107
Message 4 of 6
Flag Post
HP Recommended

@murkyemu wrote:

It is a 880-047c

 


@murkyemu 

 

The specs of your machine is

 

              https://support.hp.com/au-en/document/c05697354

 

Its motherboard uses  uATX: 24.0x24.0 cm (9.4x9.4 in) form factor which is uATX standard. All standard uATX form factor motherboards will fit.

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




>

View solution in original post

Was this reply helpful? Yes No
murkyemu
Author
New member
3 2 0 0
Message 5 of 6
Flag Post
HP Recommended

Could a GIGABYTE B365M DS3H that is10.43 x 10.43 x 2.12 inches work?

Was this reply helpful? Yes No
banhien
Level 19
Level 19
94,749 93,406 12,276 26,107
Message 6 of 6
Flag Post
HP Recommended

@murkyemu 

 

I don't know, all I know is 10.43 is greater than 9.4

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




>
Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation