I want to add ram to my pc. Model: 24 df0215in

[rocky_raccoon]

I own a Hp All in One Pc. The model is given as 24 df0215in.

Other details.

Processor AMD Ryzen 3 3250U with Radeon Graphics 2.60 GHz
Installed RAM 8.00 GB (5.92 GB usable)
Product ID 00327-35897-34614-AAOEM
System type 64-bit operating system, x64-based processor
I want to add 8gb of ram to the device. What kind of ram should I be looking at?

[BeemerBiker]

This is your motherboard based on the ID 7UH93AV

 https://support.hp.com/in-en/product/hp-all-in-one-pc-24-df0000a/32516387/document/c06543675

It simply says there are two slots and a maximum of 16gp possible. and a list of parts (upgrades) is here

https://partsurfer.hp.com/Search.aspx?type=PROD&SearchText=1K0F8AA

To be sure you buy the correct memory your should run a diagnostic like cpu-z or hwinfo64 that can tell exactly what your have.  You can then order a matching chip.  You have either a single 8gb or (Unfortunately)  you may have a pair of 4gb.,  CPU-z gives the part number of the existing chips which can make finding easier.  Note that occasionally the memory can run at lower speed than it is listed at.  Do not buy a faster speed memory than the "2666" that is listed at that HP parts site.

[rocky_raccoon]

This is what it showed. Is this compatible?

SAMSUNG M471A1K43CB1-CTD 8GB DDR4 2666MHz Memory Module - Memory Modules (8GB, 1 x 8GB, DDR4, 2666 M...

[BeemerBiker · Accepted solution]

That looks good!

The Samsung photo shows chips on both sides of the stick which is correct.

Don't be surprised if that clock speed runs slightly slower with a second chip. 

You can also find used exact chip Adata AO1P26KC8T1 on ebay for under $30 USD