• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
HP Recommended
OMEN 30L Desktop GT13

I want to upgrade my graphic card on my OMEN 30L Desktop GT13-1xxx with CPU 11th Gen i9-11900k with motherboard ID 886C from rtx3060ti to rtx4070ti, after install the new graphic card 40 series the pc start the fans are spinning including the graphic card fans but doesn't show any video signal, I receive only an info message "  Your PC will start the standby mode " . I have tried to connect the video cable in all 4 ports ( 1 DP and 3 HDMI ) the result was exactly the same. The PC has the F13 bios version. 

 

What can I do in this situation?

2 REPLIES 2
HP Recommended

@Moreniko93,

 

Welcome to our HP Community forum!

 

Well, the first thought that came up is that an RTX 3060 Ti 8GB has a 200-watt TDP, whereas an RTX 4070 Ti has a 285-watt TDP, and requires at least a 700-watt power supply.

 

Is your OMEN 30L Desktop GT13-1xxx fitted with at least a 700-watt power supply?

 

Kind Regards,

 

NonSequitur777


HP Recommended

I made a mistake, the 40 series isn't a Ti version, it's a simply OC version from Asus Prime , as I saw, they recommend a PSU with 650W. Also I found the serial number for my OMEN 30L Desktop ( 60D35EA#ABAZ ).

 

Can you please check the original config of my desktop and confirm me if it's possible, if my config is supporting the 40 series if I change the PSU with another one of 700W or 750W. Which one do you recommend me?

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.