Guidelines
Are you having HotKey issues? Click here for tips and tricks.
HP Recommended
HP ProDesk 600 G4 Small Form Factor PC

Is it possible to remove the fan and leave the heatsink in the HP ProDesk 600 G4 SFF?

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

@IMTheNachoMan,

 

Welcome to our HP User Forum!

 

Yes, you can -you can reach the 4 screws that secure the CPU cooling fan on the CPU heatsink with a screwdriver, leaving the heatsink secured to the motherboard:

 

NonSequitur777_0-1670303877933.png

 

I imagine you're asking this to replace the CPU cooling fan, because this fan must be installed not only because otherwise the heatsink will not be able to adequately cool the CPU, but also because when you remove the fan's 4-pin PWN power connector from your motherboard, your PC will spit out a start-up error.

 

Hope this was helpful.

 

Kind Regards,

 

NonSequitur777


View solution in original post

3 REPLIES 3
HP Recommended

@IMTheNachoMan,

 

Welcome to our HP User Forum!

 

Yes, you can -you can reach the 4 screws that secure the CPU cooling fan on the CPU heatsink with a screwdriver, leaving the heatsink secured to the motherboard:

 

NonSequitur777_0-1670303877933.png

 

I imagine you're asking this to replace the CPU cooling fan, because this fan must be installed not only because otherwise the heatsink will not be able to adequately cool the CPU, but also because when you remove the fan's 4-pin PWN power connector from your motherboard, your PC will spit out a start-up error.

 

Hope this was helpful.

 

Kind Regards,

 

NonSequitur777


HP Recommended

yes, the CPU fan (and case fans) can be replaced simply remove the existing one note the fan model number on the fan's label and do a google search for that number

 

HP does not usually sell the cpu cooler fans separately

 

you sometimes must remove the cpu heatsink in order to remove the cpu coolers fan as these systems came with several different coolers depending on the cpu that was used

 

if you have the base model cooler you can remove the existing fan by removing the 4 screws from the black fan and then unclip the fan's  power line from the motherboard

 

see the attached picture, the silver screw/spring is the cooler mounting screw and next to it (on the right) is the fan mounting screw

 

please read the service manual for your model system

 

https://support.hp.com/us-en/product/hp-prodesk-600-g4-small-form-factor-pc/21341193

HP Recommended

Yes, I want to replace the fan with a softer one. 

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.