Product: Product name : HP Pavilion Desktop PC 570-p0xx, Product number : V9B40AA#ABA
Operating System: Microsoft Windows 10 (64-bit)
Hi, can someone recommend a computer case that will allow the placement of the Lubin 82F2 Motherboard. The spec sheet says that the motherboard is a custom form factor with Dimensions: 20.5x22.0 cm (8.1x8.7 in).
It would be not be advisable. It is an never ending crisis with these units.
1) The form factor is not a standard.
2) There is no pop-out rear I/O plate. Re-wiring the front power switch of any foreign case is difficult.
3) The actual problem of a GPU card fitting is not resolved, as the 24 pin main ATX plug will still interfere with dual slot cards. I think the max length allowed was 5.7" for a dual width card.
This system is feedback driven thru Solution and Kudo flags. It's the only means of knowing if you have been served. Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..
HP Envy 8 5010 Tablet (2) HP DV7t i7 3160QM 2.3Ghz 8GB Printer -- HP OfficeJet Pro 8620 Legal Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.
Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".