cancel
Showing results for 
Search instead for 
Did you mean: 
ClemP
Level 1
7 4 1 0
Message 1 of 3
496
Flag Post

Solved!

M2.2280 SSD Support in Envy 700-406

HP Recommended
Envy 700-406
Microsoft Windows 10 (64-bit)

I want to add an SSD (as my primary drive) to my system. I was going to go with a SATA SSD but just found out that the M2.2280 SSDs are almost 6 times faster. My question is will a M2.2280 SSD (like the SanDisk - Ultra 1TB Internal PCI Express 3.0 x4 (NVMe) Solid State Drive, Model SDSSDH3N-1T00-G25) work on the Envy 700-406 or must I use a SATA SSD???

 

Thanks for your help,

Clem

1 ACCEPTED SOLUTION

Accepted Solutions
wb2001
Level 15
Level 15
12,842 12,626 1,774 5,022
Message 2 of 3
Flag Post
HP Recommended

@ClemP,

This PCIe x 1 card should work.

 

This system is feedback driven thru Solution and Kudo flags. It's the only means of knowing if you have been served. Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..

HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.

View solution in original post

Was this reply helpful? Yes No
2 REPLIES 2
wb2001
Level 15
Level 15
12,842 12,626 1,774 5,022
Message 2 of 3
Flag Post
HP Recommended

@ClemP,

This PCIe x 1 card should work.

 

This system is feedback driven thru Solution and Kudo flags. It's the only means of knowing if you have been served. Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..

HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.

View solution in original post

Was this reply helpful? Yes No
ClemP
Author
Level 1
7 4 1 0
Message 3 of 3
Flag Post
HP Recommended

Thanks for the quick response. I knew that my motherboard was probably NOT compatible. However, it didn't dawn on me that there might be an adapter. Thanks!

 

I haven't quite decided to go with the SSD. But, I'm almost there!

 

Thanks again!

 

Clem

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation