-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Desktop Hardware and Upgrade Questions
- Multiple monitors

Create an account on the HP Community to personalize your profile and ask a question
10-31-2016 09:44 PM
Can I set up more than two monitors in Windows 10 on my HP Pavillion desktop?
Solved! Go to Solution.
Accepted Solutions
11-01-2016 01:34 PM
Hi,
From its specs:

- HDMI
- DVI
- Form Factor: Low profile with ATX bracket
- Dimensions: 16.7 cm x 6.8 cm (6.6 in x 2.7 in)
- Maximum resolution:
- HDMI resolution: 1920 x 1080 (1080p)
- DVI (single-link) resolution: 1920 x 1200 x 32bpp at 60Hz
- Analog VGA resolution (with adapter): 2048 x 1536 x 32bpp at 60Hz
- 2 GB onboard memory
- Memory interface: 128-bit DDR3
- HDCP support
- Supports Blu-ray
- Total power consumption: ~50 W (single slot)
- Supports up to two displays at the same time
Source: http://support.hp.com/vn-en/document/c04476628
Now, if you wish to add 1 more monitor you have to buy more hardware
- New video card which supports 3 monitors BUT it must not exceed 50W (single slot) otherwise you have to buy new PSU and small enough to fit.
- Buy something like
http://www.matrox.com/graphics/en/products/gxm/th2go/displayport/
Please also read the following guide:
Regards.
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
11-01-2016 02:30 AM
@damcbain wrote:Can I set up more than two monitors in Windows 10 on my HP Pavillion desktop?
Hi,
What is your Pavilion desktop ? Not all desktops support 2 or more monitors. Please check its label.
Regards.
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
11-01-2016 01:34 PM
Hi,
From its specs:

- HDMI
- DVI
- Form Factor: Low profile with ATX bracket
- Dimensions: 16.7 cm x 6.8 cm (6.6 in x 2.7 in)
- Maximum resolution:
- HDMI resolution: 1920 x 1080 (1080p)
- DVI (single-link) resolution: 1920 x 1200 x 32bpp at 60Hz
- Analog VGA resolution (with adapter): 2048 x 1536 x 32bpp at 60Hz
- 2 GB onboard memory
- Memory interface: 128-bit DDR3
- HDCP support
- Supports Blu-ray
- Total power consumption: ~50 W (single slot)
- Supports up to two displays at the same time
Source: http://support.hp.com/vn-en/document/c04476628
Now, if you wish to add 1 more monitor you have to buy more hardware
- New video card which supports 3 monitors BUT it must not exceed 50W (single slot) otherwise you have to buy new PSU and small enough to fit.
- Buy something like
http://www.matrox.com/graphics/en/products/gxm/th2go/displayport/
Please also read the following guide:
Regards.
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.