Need screws for stand base - HP pavilion 27 a-227-c

[stefric]

I need screws for the stand base on the HP pavilion 27 a-227-c. They are short machine screws with an alan wrench head. Anybody know the part number and where I can get them?

[itsmyname]

@stefric -- do you have one of the required screws?  If so, closely look at the diameter of the screw, and any "taper" of the screw (from the head down to the point), and the "pitch" of the screw.  The "pitch" is the distance between "12-o-clock" at any point on the screw, and "12-o-clock" after a 360 degree rotation of the screw.

Your replacement screws need not require an Allan wrench -- either Robertson or Phillips or flat-blade heads will work, if you have a matching screwdriver.