-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
Create an account on the HP Community to personalize your profile and ask a question
Your account also allows you to connect with HP support faster, access a personal dashboard to manage all of your devices in one place, view warranty information, case status and more.
It has been a while since anyone has replied. Simply ask a new question if you would like to start the discussion again.
2
0
0
HP Recommended
HP Recommended
You have the bulldozer motherboard
https://support.hp.com/us-en/document/c04819894
Processor upgrade information
- TDP: up to 35 W
- Socket type: LGA1151
- Motherboard supports the following processor upgrades:ProcessorTDPIntegrated GraphicsIntel Core i7-6700T (Skylake) 2.8 GHz Quad Core35 WIntel HD Graphics (GT2)Intel Core i5-6400T (Skylake) 2.2 GHz Quad Core35 WIntel HD Graphics (GT2)
Only the above CPUs will work in your AIO.
While you may have a BullDozer motherboard, it is only Microsoft bull that is preventing you from running Windows 11.
-----------instruction for upgrading to Win11----------
Windows 11 can be easily installed on just about any windows 7, 8 or 10 system as an upgrade or a clean install.
I have run it on some really old HP systems with no problem.
Have you created a backup?
Can you pass diagnostics?
Tap the ESC key after powering on and press F2 to run diagnostics.
Do not allow any updates if disk or memory fail, especially a BIOS update.
For a new system that has UEFI bios and GPT but does not meet all requirements,
Windows 11 can be installed using the Rufus trick.
Get Rufus here
Download Windows 11 with this link and use an 8gb or larger USB.
Configure Rufus to use UEFI boot and select the option that creates a local account
so as to avoid the Microsoft email login. Use options shown below:
Uncheck the "Set regional options" if you are creating the USB on another system that has a different OS than yours.
You have to click "start" before those options show up.
Insert the USB drive into your laptop. Do not boot the laptop. Just browse to the folder and run "setup.exe"
be sure to tell it not to delete any of your files.
You may want to make a backup first.
Thank you for using HP products and posting to the community.
I am a community volunteer and do not work for HP. If you find
this post useful click the Yes button. If I helped solve your
problem please mark this as a solution so others can find it
2
0
0
HP Recommended
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
Didn't find what you were looking for?
Ask the community