ODD change to SSD HP All-in-One - 22-c0014ur

[ShADoZ]

Hello! HP community i have a question. I have HP All-in-One - 22-c0014ur. In its configuration there is no CD ROM, but  there is free space for CD rom or HDD/SSD. I bought SSD and SSD BOX. Unfortunately i didnt find  the second HDD_POWER  and HDD_SATA connectors in motherbord. I have connector (plume) ODD_SATA, but i dont see the secont connector   power  for using CD ROM or HDD/SSD.

My question is how i can connect my SSD to motherbord for correct work and what cables i need  for  that. 

Please tell me what is a moterbord (model)  in  HP All-in-One - 22-c0014ur?

Please find attached photos (1 and 2 photos - motherbord and connectors HP All-in-One - 22-c0014ur, 3 - connector   my SSD (sata and power- standart SSD).

THX!

[DGroves · Accepted solution]

I see a SATA connector and possibly a SSD M.2 connector located right above the coin cell cmos battery

the coin cell battery is the round silver item near the bottom of the picture with the " + " 

note that the M.2 connector may not be for hard drives/SSD  it might only be for a wireless or bluetooth card

https://support.hp.com/us-en/document/c06049169

[ShADoZ]

DGroves BIG THX you behind motherbord confihuration doc!

Manual describes :  One M.2 socket 3, 2280 type for SSD, and ODD power and power connector.

But i can not understand what cabel need ODD power and power connector...

and what SSD M.2 model support (size ) support motherbord?

[DGroves]

a ODD connector is a semi standard used when space is at a premium and full sized pwr connectors use up to much space

look at the links

https://www.logicsupply.com/sataodd-mpl/

https://www.youtube.com/watch?v=fpUOlVTb7EQ