ODD optical drive

[Boboleto]

I need to connect a optical drive. I need a power cable for this drive. I can not it buy, because any seller does not have it.  

If possible i want know type of connector and it pin asssigment.

Thanks.

[Pallipurath]

Hi @Boboleto 

Welcome to the HP Support Community.

Thank you for posting your query.

I understand that you would like to connect a optical Drive The optical drive (ODD) in most modern PCs uses a standard SATA power connector, which is a 15‑pin connector providing +3.3V, +5V, and +12V rails. If your drive is older (IDE/PATA), it may instead use the 4‑pin Molex connector.

Common Optical Drive Power Connectors

Connector Type

Pin Count

Voltage Rails

Typical Use

SATA Power

15 pins

+3.3V, +5V, +12V

Modern DVD/Blu‑ray drives

SATA Power Pin Assignment

Pin 1–3: +3.3V (rarely used by ODDs)

Pin 4–6: Ground

Pin 7–9: +5V (logic and electronics)

Pin 10–12: Ground

Pin 13–15: +12V (motor for spinning discs)

Take care and have an amazing day!

[Boboleto]

Thanks for explanation. But, you explained only SATA power standard connector. I need know pinout of mainboard connector of HP Z2 Tower Gi1. It is signed as P161 with label SARA-PWR1. The type of convient type of connector i need too.

[Pallipurath]

Hi @Boboleto,

Thank you for responding.

I understand that you are looking for SATA -PWR1 connector. I would request you to contact the nearest service center for assistance, if the device is out of warranty, it may incur charges: https://support.hp.com/in-en/help/service-center

Have a good day.