-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Desktops
- Desktop Hardware and Upgrade Questions
- Omen 40L Side Panel Release Stuck
Create an account on the HP Community to personalize your profile and ask a question
03-24-2024 03:27 PM
The top mounted side release latch for the glass panel is stuck / doesn't work.
Any way to bypass it?
The metal side panel releases ok.
Thanks
Solved! Go to Solution.
Accepted Solutions
05-10-2024 03:51 PM - edited 05-10-2024 03:52 PM
https://youtu.be/EUszmk54akk?feature=shared
Here is the video. take the front panel off first. Then take the top panel off. The latch needs some force to open.
I hope this helps!
My room is a mess too.
05-09-2024 07:59 PM
I found a solution, take the top panel off after removing the front glass panel, using a screwdriver you must manually slide the release latch, it will take some force so be careful. if you cant do it ill happily post a video on my youtube and send you the link.
05-10-2024 03:51 PM - edited 05-10-2024 03:52 PM
https://youtu.be/EUszmk54akk?feature=shared
Here is the video. take the front panel off first. Then take the top panel off. The latch needs some force to open.
I hope this helps!
My room is a mess too.
05-18-2024 03:41 PM
The left side glass panel door needs to be easily unlocked from under the front glass fan panel and a Torx T-15 bit to drop the screw. The right metal panel is already dropped.
Once the front glass fan door is removed, remove the grid panel that covers the fans and look at the top left and right corners on the chassis. You'll see the two screws. Using the Torx T-15 bit, loosen the left-side screw (a flexible screwdriver works the best) and it will drop, just like the right-side screw already is. Lastly, tighten the screw in-place.
The left glass panel door will now release when pressing the button on the top of the chassis.