-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Desktop Hardware and Upgrade Questions
- PCI Data Acquisition and Signal Processing Controller Driver

Create an account on the HP Community to personalize your profile and ask a question
12-30-2021 04:35 PM
Hello, I recently had to reinstall Windows 10 on my desktop and I noticed that a few devices did not install. These include the PCI Data Acquisition and Signal Processing Controller, the PCI Memory Controller, and the SM Bus Controller. I have already navigated to the drivers page for my PC, I am just unaware of exactly which drivers are needed since none correlate to the devices listed.
As a side note I have replaced the graphics card with a GTX 1660 Super and the HDD with a Samsung EVO 970 NVME SSD.
Here is a picture:
Thank you for the help!
Solved! Go to Solution.
Accepted Solutions
12-30-2021 05:03 PM
Hi:
You need this driver which should install all 3 devices...
This package contains the Intel Chipset Installation Utility. This utility enables the operating system to show the correct name for the installed Intel hardware in the Microsoft Windows Device Manager.
https://ftp.hp.com/pub/softpaq/sp101001-101500/sp101171.exe
Restart the PC after installing the driver.
12-30-2021 05:03 PM
Hi:
You need this driver which should install all 3 devices...
This package contains the Intel Chipset Installation Utility. This utility enables the operating system to show the correct name for the installed Intel hardware in the Microsoft Windows Device Manager.
https://ftp.hp.com/pub/softpaq/sp101001-101500/sp101171.exe
Restart the PC after installing the driver.